Solvent Yellow 163
Transparent Yellow GHS affords standard medium reddish yellow shade and it’s melt point is 193℃. It exhibits excellent light and weather fastness, gives both migrate and heat resistance. Highly recommend use for coloring of engineer plastics, especially outdoor products like automobile decoration.
Key Features
Technical Specifications
| Trade Name | Transparent Yellow GHS |
| C.I. NO. | 58840 |
| CAS NO. | 13676-91-0 |
| EU NO | - |
| Chemical Group | Anthraquinone |
| Solubility | Excellent in organic solvents |
Physical Data & Fastness Properties
| Light Fastness | Good to Excellent |
| Heat Resistance | 193℃ |
| Weather Fastness | PC:4-5, PET:5 |
Applications
- Nylon (PA)
- Polystyrene (PS)
- ABS
- Polycarbonate (PC)
- PET
- PMMA
Usage Instructions
Recommended for coloring engineering plastics such as Nylon (PA), Polystyrene (PS), ABS, Polycarbonate (PC), PET, PMMA. Melt point: 193℃. Typical concentration: 0.1-2.0% depending on color depth required. Ensure proper dispersion during processing.
Related Products
You may also be interested in these products
Solvent Blue 104
Transparent Blue R affords medium blue shade and it’s melt point is 220℃. It exhibits excellent heat resistance, light and weather fastness. It’s a important solvent dye widely used for engineer plastics includes PET, PC, PA etc. It’s also used for spin dyeing of nylons.
Solvent Blue 122
Transparent Blue R affords dull reddish blue shade and it’s melt point is 239℃. It shows highly color strength, good light fastness and excellent heat resistance. Primarily used for coloring of engineer plastics includes PET blowing and highly recommend used for spin dyeing.
Solvent Blue 35
Transparent Blue 2N affords bright greenish blue shade and it’s melt point is 127℃. It shows high color strength and exhibits excellent heat resistance. It’s light fastness is excellent but will decreased according the adding of TiO2, as a economic solvent dye used for coloring of PS and ABS.
Solvent Blue 45
Solvent Blue RS affords reddish blue shade and it’s melt point is 200℃. It exhibits good light fastness and heat resistance and can be used for engineer plastics. It’s highly recommend for spin dyeing and blowing PET.